WiNRADiO Future of radio
   

   WR-3150i-DSP Specifications
Receiver type PLL-based triple-conversion superheterodyne
Frequency range
AM, SSB, FM-N 0.15-1500 MHz
FM-W 30-1500 MHz
Note: In some countries certain frequencies may be omitted due to government legislation.
Tuning resolution 10 Hz (USB/LSB/CW: 1Hz)
Mode AM, SSB/CW, FM-N, FM-W
Image/Spurious Rejection    65dB typ.
Dynamic range   85dB
Signal meter linearity   ± 5dB
Selectivity
SSB/CW 2.5 kHz @ 6dB
AM 6 kHz @ 6dB
FM-N 15 kHz @ 6dB
FM-W 230 kHz @ 6dB
Scanning speed
AM,SSB/CW 10 channels/s
FM-N, FM-W 50 channels/s
Sensitivity

AM/SSB/CW 10dB S/N

FM-N/FM-W 12dB SINAD

Mode <0.5 MHz 0.5-1.5 MHz 1.5-30 MHz 30-1000 MHz 1-1.5 GHz
AM n.sp. 5µV 1µV 1µV 1.5µV
SSB n.sp. 0.9µV 0.3µV 0.3µV 0.5µV
FM-N n.sp. 0.9µV 0.35µV 0.35µV 0.4µV
FM-W n.sp.   -   - 1µV 1µV
Intermediate frequencies
f [MHz] IF1 [MHz] IF2 [MHz]
0.15-399.999 556.325 58.075
400-807.999 249.125 58.075
808-1113.999 249.125 58.075
1114-1500 556.325 58.075
Mode IF3 [MHz]
AM,SSB,FM-N 0.455
FM-W 10.7
Frequency stability 10 ppm (0 to 60° C)
Antenna input 50 ohm (BNC connector)
Audio output 0.2W (8 ohm load)
Specifications are subject to change without notice.
Click on the card image to enlarge the view:

WR-1000i Card

Click on the screen image to see the virtual front panel:

WR-3000i-DSP Front Panel

See also:

 Spectrum Scope
 Visitune
 Digital Suite option
 Advanced Digital Suite option
 Trunking option
 Database Manager option
 Comparative summary of WiNRADiO receivers
 Third party developer's information
 Order Information

Back to WR-3150i-DSP